Jack Cayes Posted January 17 Report Share Posted January 17 Good evening everyone, fielding a question before I dive into taking things apart or having to order replacement parts. My brewflo tap leaks when the beer connection is on the keg. It's hard to control the flow at all really. I have the pressure set at 2 and the keg was full. Half way full now. It seems to be getting worse. I just turn the pressure down to see the effects. Any ideas besides adjusting the pressure setting? The line was properly installed the the flow valve is set at just under half way. Thanks in advance. Cheers! Link to comment Share on other sites More sharing options...
Mike A Posted January 17 Report Share Posted January 17 tried deflating by disconnecting from air for a short pull then re-connect. I.e. inside the bag vs outside the bag pressure imbalance? Link to comment Share on other sites More sharing options...
xpsTech Posted January 17 Report Share Posted January 17 Hi @Jack Cayes, suggest first disconnect from the keg then ensure the beer line is pushed all the way into the tap till it hits the internal stop. It’s a few cm from when the line enters the tap to the end stop. cheers. 1 Link to comment Share on other sites More sharing options...
Jack Cayes Posted January 17 Author Report Share Posted January 17 Thanks for the response! I de pressurized the keg and replaced the lines and cleaned the keg connection. Back to normal! Less head and a cleaner pour. Cheers mates ! 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now