Captain 3 Droids Posted February 14, 2021 Report Share Posted February 14, 2021 Beer Blending Something that doesn’t seemed to be discussed much is the blending of beers. It is very helpful in the experimentation and in improving brews that are perhaps to your dislike. It is achievable simply if you bottle, have 2 or more BrewFlo units or the various stainless keg setups with 2 or more taps or easily changeable beer connections between kegs. I have used it mainly for experimentation and will discuss this first. Experimentation A simple example is take A Coopers Pacific Pale Ale that calls for dry hopping with Galaxy. So you brew it with say 25g of the hops. Then you brew it with another hop, say 25g of mosaic. After carbonation (now although the age/maturity of each will be different I don’t believe this will alter outcomes to any great degree) you pour a glass with half of each thus having a Pacific Pale Ale that is in a sense dry hopped with Galaxy and Mosaic. You like it? so your next brew could well be this. Now that’s a simple example however look at the experimental possibilities, the trials of hop combinations including even the steeping of hops and/or grains. Improving Brews (perhaps to your dislike) I have on occasions had brews that I find a bit weak, a bit too strong or just don’t like (not infected). So I have blended them in the glass, half and half, 3/4 with a 1/4 etc and quickly find the proportions that makes a real positive change. It can be an ale with an ale, an ale with a lager etc. Have a think about the above two suggestions, the experimentation is great fun which can produce great results and the improving method does work. 2 3 Link to comment Share on other sites More sharing options...
J P Posted February 14, 2021 Report Share Posted February 14, 2021 Cool outside the box thinking. I remember loving “black and tans” back in the day (basically Guinness on the bottom and a light crisp lager layered on top in the glass) both for visual and variety in a single glass. your idea makes awesome sense and the possibilities are obviously endless 1 Link to comment Share on other sites More sharing options...
Captain 3 Droids Posted February 20, 2021 Author Report Share Posted February 20, 2021 On 14/02/2021 at 5:03 PM, J P said: Cool outside the box thinking. I remember loving “black and tans” back in the day (basically Guinness on the bottom and a light crisp lager layered on top in the glass) both for visual and variety in a single glass. your idea makes awesome sense and the possibilities are obviously endless Thanks for the nice comment. I forgot about the “black and tans”, what a memory trip, had many in my youth. If you try something let us know, might be good to record for future brewing. 1 Link to comment Share on other sites More sharing options...
Captain 3 Droids Posted July 26, 2021 Author Report Share Posted July 26, 2021 Interesting, the keg finishes with a 1/2 or 1/4 a pint( glass), new keg in, do you drink the half filled/quarter pint? Or do you top it up with your next connected brew. Well I do the later and the results are quite surprising. 3 Link to comment Share on other sites More sharing options...
Captain 3 Droids Posted December 5, 2021 Author Report Share Posted December 5, 2021 @Dustin Frothmannow you have easy access to 3 different beers you must do a few experiments. Also when a keg “blows” top your glass up from another tap. 1 1 Link to comment Share on other sites More sharing options...
Hambone Posted April 8, 2022 Report Share Posted April 8, 2022 This is something I've done for years. Well, at least since I started kegging. There's plenty of vids on the untervebs about it. Have a crack, lots of ways to do it and it's seen the birth of some great beers. Do you wonder what a super hoppy lager would taste like? Me too. 70% Bavarian Lager 30% Jolly Roger hopped up. Have a crack. Don't be afraid to give it a little mix. Cheers 1 Link to comment Share on other sites More sharing options...
Rob Courtney Posted April 8, 2022 Report Share Posted April 8, 2022 Holy crap, hw have I missed this thread...and thanks for the great ideas, JR with lager, balck and Tans, last half of old bottle with new half of new bottle. Going to try this tonight 1 Link to comment Share on other sites More sharing options...
Rob Courtney Posted April 8, 2022 Report Share Posted April 8, 2022 So, not in the position of mixing an ale with a lager but Aussie Premium hopped with Pride of Ringwood (which definitely tatses better in the Asashi glass and a Birra Lager. What a great idea, can notice the hops mix and tasting both beers in te one sip. Have to give this a go with a few others and see if I can come up with a winner 1 Link to comment Share on other sites More sharing options...
Captain 3 Droids Posted August 17, 2022 Author Report Share Posted August 17, 2022 Thought I would start with a blend of two. 50% Stone and Wood Pacific and 50% The GOAT Amber ale. The dry hop combination is Sequoia, Melba, Idaho 7 (Stone and Wood Pacific) Galaxy, Sequoia (The GOAT Amber Ale). So why you asked. Well hadn’t pour a beer from the two taps since Sunday so thought I’d give both lines a replacement with fresh beer. The result is actually magnificent, the hops give real bite, bitter after taste and very refreshing. Link to comment Share on other sites More sharing options...
J P Posted August 18, 2022 Report Share Posted August 18, 2022 That mixture sounds like it’d work really well for complexity and balance!!! Might follow suit as soon as I get more stone and wood brewed! Truly a top drop both of them 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now